ModuleXBee S2C UFL 6.3mW 1200m Zigbee Wireless Data Module S2
Mouse over to zoom in
- Product 8/23
-
XBEE Introduction
Xbee module is a wireless module adopts ZigBee technology, through the serial port to communicate with MCU and other equipment, fast achieve the device access to the ZigBee network
This is a 2.4G XBee wireless module. This module uses the 802.15.4 protocol stack, through the serial port to communicate with MCU and other equipment, support communication of point to point and point to multipoint network. The module antenna is wire antennas, simple, convenient
Parameters
3.3V @ 50mA
The maximum communication rate 250kbps
1mW output (+0dBm)
400 feet (120 meters) communication distance
Wire antenna
Fully FCC certified
6 10-bit ADC input pins
8 digital IO pins
128-bit encryption
Local or over-air configuration
AT or API command set
XBee module can be equipped with PCB chip antenna, monopole antenna integration winding, or can be connected bipolar or other external antenna U.FL antenna connector.
Chip antenna and telescopic antenna suitable for any application, especially for embedded applications. Because the wireless signal cannot be transferred in plastic or sealing, so in this type of application can be completely closed antenna.
If the sealing is metal, or the solution to the physical characteristics of higher, U.FL connector can be used to connect the adapter cable and dipole antenna. Different antennas of different types of distance, so you need to consider carefully and select the antenna type you need
Materials and technical support
1, XBee S2 ZB module technical manual
2, XBee S2 ZB module bottom diagram (USB or RS232 interface
3, XBee S2 chematic and PCB library
4, AT directive Chinese command
5, API Operations Guide Chinese manual and information
6, XBee S2 ZB control module code (MSP430, STM32)
7, XBee S2 Network design idea of ZB module
Customers who bought this product also purchased...
-
- $2.99
-
- $0.79
-
- $2.25
-
- $0.64
-
- $1.15
-
- $4.40
