Sign In / Register

Shipping List (Ver.3)

2* XTEND VB module 

1* USB base board for XTEND module

1* the 5V/2A power adapter

1* USB cable

2* 5dBi 900M rod antenna

1* TTL-XTEND base board

1* DuPont line

1* fixed pillars, screw, nut

Parameters

Working voltage: 2.8 - 5.5VDC regulated

Frequency range: 902 - 928MHz

Serial interface: 3V - 5V CMOS UART - no need to configure

The emission current: 730 mA (@ 5V 1W TX, Power Output)

Receiver operating current: 80 mA (@ 5V 1W TX, Power Output)

Indoor transmission distance (w/ 2.1 dB dipole antenna): as far as 3000 feet (900 meters)

Outdoor line of sight (w/ high gain antenna): as far as 40 miles (64 km)

Transmit power (software adjustable): 1mW - 1W (0 - 30 dBm)

Data throughput (software adjustable): 9600 or 115200 BPS

RPSMA antenna interface

Note

1, TTL, USB, RS232 Base Board

For the power of the output 1W power, XTEND must be used 5V power supply, current is close to 1A, and the line width of the single line of PCB is 40mil (1mm). Our TTL bottom board, the line to ensure 50*2=100mil (2.5mm), fully meet the requirements

2, Computer USB power supply

The use of PC or notebook USB power supply, only XTEND module configuration, 1W transmitter power can not be transmitted in the case of communications testing, because the general USB interface can only provide the maximum 500MA current

Xtend is very easy to use, and has the ultra long transmission distance, outdoor without occlusion case as far as you can reach 40 miles (lift), even in the room also can reach 3000 feet (900 meters) of transmission distance. Its work in the 900M ISM frequency band, with 115.2kbps data throughput, the module has a RPSMA antenna interface

XTend module uses FHSS (FM spread spectrum) technology to avoid interference and transmit power software adjustable (1mW-1W).