Sign In / Register

Parameters:

1 Using external SMA interface antenna design, ISM band, 2.54mm in-line type, small volume, convenient for embedded applications.

2 Supports data reception of six channels (one to six)

3 General modulation methods such as GFSK/FSK are supported

4 Support 2Mbps/1Mbps/250Kbps data rate, can set different transmission power

5 Multi-frequency point: 126 frequency points, meeting the needs of multi-point communication and frequency hopping communication, 2400 MHz to 2525 MHz, 1 MHz frequency hopping step by step

6 LDO with internally integrated high PSRR

7 Wide power supply voltage range: 2.7~3.6V, typical 3.3V.

8 The average emission current is as low as 80mA(17dBm)

9 Receive sensitivity: -90dBm@1000kbps

10 The transmission power can reach up to 20dBm.

11 Using 4-wire SPI interface, the speed can reach 10MHz.

12 Built-in Enhanced ShockBurst baseband protocol engine

13 Hardware Interrupt Output for Receiving and Sending Data

14 Supports 1bit RSSI output

15 Operating temperature: -20℃~60℃

16 The best transmission distance: at 250BPS in the open area, the test distance for sending and receiving 10 bytes of data is as far as about 1000 meters.

17 Antenna gain: 2.5dBi, antenna and module have been matched and tested, please do not replace antenna.