Sign In / Register

Parameters
The modular nature: non isolated step-up module (BOOST)
Input voltage: 10-32V default with low voltage, low voltage is used in automobile electric fire suppressed electric moment. This module can not long time work pressure status.
Output voltage: (1) continuously adjustable (12-35V)
              (2) fixed output (12-35V optional)
Output current: 10A (MAX)
Input current: 16A (MAX) (more than 10A ,please strengthen heat dissipation)
Output power: natural cooling 100W (MAX), strengthen the heat 150W (MAX) using actual power please more actual situation to decide whether to add a fan, please make sure that the heat sink temperature not exceeding 80 degrees
Easily drive the 65W 90W notebook computer comprises dual core
Temperature of notebook computer module with 12V battery with 19V 3.42A about 45 degrees
Efficiency: 94% (input 16V output 19V 2.5A) (for reference only)
Output ripple: 2% (MAX) 20M bandwidth
Working temperature: industrial grade (-40 to +80 degree) (environmental temperature exceeds 40 degrees, please reduce power use, or fan)
Full temperature: 45 degree
The typical no-load current: 25mA
Load regulation: 0.5%
Voltage regulation rate: 0.5%
The dynamic response speed: 5% 200uS
Short circuit protection: no (please install fuse or circuit at the input)
Input reverse connection protection: no (or a series diode in the input)
Connection: welding free, terminal

Application
1).DIY adjustable output power, only need to input your access to 12V power supply, the output voltage (14-35V) you can free continuous adjustment of output voltage, but can not be lower than the input voltage.
2). Universal car laptop power. The input to the 12V power supply output regulation on your laptop, you can work with the voltage.
3). Boost charger, you can charge the battery is higher than that of 12V with 12V power supply, such as 24V battery.
4). In order to supply your electronic equipment, as long as the voltage regulator to your required voltage and current does not exceed the rated current can work normally.
5). Before the system level power supply, when you do a project as the input of 10-18V, and the system board you need the power of about 24V and its great power, with common DC-DC module power is too small, then you choose this module will be your best choice, no debugging directly on the machine you can easily do work, high efficiency and high power boost

Size: 65 (L) *47 (W) *23.5 (high) mm (not including the pillars) the new version

1. Change with the airfoil cooling, the cooling effect is obviously improved, larger output power (power and fan can be up to 180W or so).
2. (please note that this function for the instant working) unique low voltage design, start-up voltage must be greater than 10V, after starting the work input power voltage instantaneous fall 5.5V can be normal output of about 90W, used for automobile ignition also ensure that the output voltage is normal (now the function test, hope customers in a timely manner to give us feedback information. In order to improve products, due to the different models of battery power is not the same degree, temporarily can not guarantee that each car can achieve the ideal effect.)
This function requires the input wire shorter is better, more coarse as possible, preferably module directly from the battery to the electric, placed near the battery position, the wire cross-sectional area of not less than 2.5 mm, of course with 4 square effect is better.
3. Optional input voltage range 8-20V (without low voltage), 10-32V (without low voltage), 10-32V (low voltage work) (new edition only),
The new version is 10-32V (without the low-voltage work)

Note
1) 12V wire length 1 meters within the wire is not less than 1.5 square meters, more than 1 meters length if please bold wire
2) module is work in high power, high temperature, and shell please install the fan, small power without fan, make sure the module heat sink temperature should not exceed 80 degrees
3) when inputting, it can not reverse; when outputting, it can not be short circuited
4) 12V battery discharge voltage is not lower than 10.5V, lithium batteries used in series (section 3.7V) discharge voltage can not be less than 2.7V
5) IN+ input anode; IN- input cathode, OUT+ output positive, OUT- output negative