Sign In / Register

Product Introduction
200W pixel on-chip system (SoC) MT9D111 image sensor, used for mobile phone /PAD/ camera. The ultra low power MT9D111 is used for DigitalClarity technology, integrated with Micron on a monolithic integrated circuit is advanced in 200W pixel sensor core of a new generation of image processing technology. MT9D111 has advanced features, which makes mobile phone manufacturers can more easily design, make the products to market faster. SOC camera device of this sheet offers new features including a more effective integrated image processing of micro controller, avoiding full reset image deformation, and used to enhance the pixel image viewing re classification. The micro controller can increase the device for adjusting color and other image processing functions, flexibility, integration of AF and JPEG compression function, saves usually need a sister device caused by the design cost and space.

MT9D111 is the first piece of integrated automatic focusing and real-time JPEG compression function of SOC device. Other properties of MT9D1111 including professional image stream processor, the 10 bit internal ADC, have better color and more clear color interpolation and meticulous, and white balance very fast gray detection, makes the lighting condition is very wide under the more clear

MT9D111 Characteristics
1 DigitalClarity CMOS image technology
2 Ultra low power consumption, low cost and progressive scan
3 The 200W pixel resolution (1600Hx1200V)
4 Optical format 1/3 inch, full resolution of 15 frames per second (FPS)
5 Integrated automatic focus and optical zoom, the real-time JPEG encoder, an integrated microcontroller, increased flexibility, used for image chip camera module in a sheet of stream processor, on-chip automatic focusing and configurable GPIO interface, support the mechanical shutter, numerous automation features, used for image correction and enhancement doesn't work when,
6 Fully automated support xenon and LED type flash exposure, including a fast adaptive, on-chip 10 bit ADC, two wire serial interface, ITU_R BT.656 (YCbCr), 565RGB, 555RGB, 444RGB and the original output data format of JPEG, 4:2:2 and 4:2:0 output.

Parameter
1 Response rate: 1.0 V / lux-sec (550nm)
2 Clock: 6 MHz - 80 MHz (integrated PLL)
3 SNR: 41dB (max)
4 Power supply voltage: digital I/O:1.7V - 3.1V
5 Digital core: 1.7V - 1.95V
6 Simulation: 2.5V - 3.1V
7 Power consumption: less than 150mW (@ 30 FPS)