Parameters
Size: 2.8 inch
LCD Type: TFT
Number of Dots: 240(RGB)*320
Controller: ILI9341
PIN NO.: 8P
Backlight: White LED
Polarizer Mode: Transmissive
Data Interface: 4-Wire SPIinterface
Viewing Direction: 12 O’clock
Outline Dimensions: 51*81.2*3.8mm
Active Area: 43.2*57.6mm
Display Color: 262K
Input Voltage: 2.8V - 3.3V
Operating Temp.: -20 ~ 70 degree
Storage Temp.: -30 ~ 80 degree
Backlight Current: 60mA
Pin Definition
1 GND (power supply)
2 VCC (power supply is 3.3V)
3 CLK (Shi Zhongxian)
4 MOSI (data entry)
5 RES (reset line)
6 DC (data / command selection line)
7 BLK (Bei Guang)
8 MISO (data output)
Note
If you want to save IO port BLK backlight can not answer; system design has been done on pull; don't answer can also lit; if you need to close the backlight will need to BLK low level or direct ground. A miso is the output signal of the screen; if you do not need to read the information on the screen; the feet can not. At least four IO port operation