Parameters
Screen Size: 4.3 inch (diagonal)
Display Ratio: 16:9
Widescreen support: Yes
Backlight: LED
Resolution: 480(RGB)*272
Brightness: 300cd/m2
LED Life Time: 300000 (Typ.)
View Angle: 70/50/70/70
Input / Output Interface: Video / CVBS;
D-Sub 15 pin female for VGA;
Active Area: 95.04(W)x53.86(H) mm
LCD Screen Size: 105.6(W)x67.3(H)x2.85(D) mm
Drive Plate Size: 80.0(W)x66.9(H)x9.1(D) mm
Working Voltage: DC 12.0V(Typ.) (Min.9.0, Max.15.0)
Working Temperature Range: -20 ~70 degree
Storage Temperature Range: -30 ~80 degree
Start time: 2.0s
Power consumption: 1.8W
Relative humidity: 5~95%RH
Input current: DC 120±20
Feature
1 The product contains driver board, 4.3 inch TFT LCD panel, key board, power line and video cable
2 DC converter, LED backlight driver, video and VGA decoder three in one
3 NTSC / PAL automatic modulation recognition and conversion
4 Operating voltage +12.0 V (Min9.0V, Max15.0V)
5 Support CVBS/VIDEO and VGA signal input
6 OSD menu control: allows to adjust the screen brightness, contrast, RGB automatic color balance, reverse, the horizontal position, vertical position
7 This product conforms to the standard RoHS
Application
Portable products
Hand-held instrument
Safety equipment
Office electronic
Industrial equipment
Instrument display
Please see following important safety instructions
1. The nominal voltage of DC input to the A/D board is 12V, The size of DC current depends on the TFT LCD, audio amplifier, etc. Please note that your AC/DC adapter's output plug need to match the DC input jack,the diameter of the jack is 5.5 mm.
2. Before connecting these input/output ports, Video port, it is strongly recommended that your turn off the A/D board and remove the DC 12V plug from the DC input jack.
3. Don’t put the A/D board into an airtight package. When it works, it will produce a certain heat.
4. When assembling it, please use a suitable force; don’t distort the PCB and other components