Parameters
Screen Size: 5.0 inch (diagonal)
Display Ratio: 16:9
Backlight: LED
Resolution: 800(RGB)*480
Brightness: 250cd/m2
Contrast: 500:1
LED Life Time: 30000hrs (Min.)
View Angle: 20/40/45/45
Input / Output Interface: Video (CVBS)
D-Sub 15 pin female for VGA
Active Area: 108.00(W)x64.8(H) mm
LCD Screen Size: 120.7(W)x75.80(H)x3.1(D) mm
Drive Plate Size: 80.0(W)x66.9(H)x9.1(D) mm
Working Voltage: DC 12.0V (Typ.) (Min.9.0, Max.15.0)
System: PAL.NTSC (automatic identifying and converting)
Working Temperature Range: -20 ~70 degree
Storage Temperature Range: -30 ~80 degree
Start time: 2.0s
Power consumption: 1.8W
Relative humidity: 5~95%RH
Input current: DC 120±20
Feature
1 The product contains AD driver board, 5.0 inch TFT LCD digital panel, key board, video line and VGA line
3 DC converter, LED backlight driver, video and VGA decoder three in one
4 NTSC / PAL automatic modulation recognition and conversion
5 Operating voltage +12.0 V (Min9.0V, Max15.0V)
6 Support CVBS/VIDEO and VGA signal input
7 OSD menu control: allows to adjust the screen brightness, contrast, RGB automatic color balance, reverse, the horizontal position, vertical position
8 This product conforms to the standard RoHS
Application
Industrial controller
Simple function equipment
Safety equipment
Medical equipment
Please see following important safety instructions
1. The nominal voltage of DC input to the A/D board is 12V, The size of DC current depends on the TFT LCD, audio amplifier, etc. Please note that your AC/DC adapter's output plug need to match the DC input jack,the diameter of the jack is 5.5 mm.
2. Before connecting these input/output ports, Video port, it is strongly recommended that your turn off the A/D board and remove the DC 12V plug from the DC input jack.
3. Don’t put the A/D board into an airtight package. When it works, it will produce a certain heat.
4. When assembling it, please use a suitable force; don’t distort the PCB and other components