Sign In / Register

Parameters

LCD size: 7.0 inch diagonal

Driver element: a-Si TFT active matrix

Display mode: Normally Black, Tranmissive

Backlight: LED

Resolution is fit for module: 1920x1080(max.)~800x600(min.)

Resolution (panel): 1024 x 3RGB x 600

View Angle: 85/85/85/85

Surface treatment: Hard Coating

Color arrangement: RGB-stripe

Interface: LVDS

Brightness: 350cd/m2

Life of Time: 30000hr (Typ.)

System Format: PAL/NTSC switch auto matically

Signal type input: HDMI, VGA, VIDEO

Start time: 3.0s

Power Supply Voltage: DC12V  +/- 25%(Type12V340mA±30mA)

Dot pitch: 0.05275(W) x 0.15825(H)mm

Dimension of Active Area(mm): 153.6(H) x 90.0(V)mm

Over all Dimension of LCD(mm): 165.75(W) x 105.39(H) x 3.4(D)mm

Structural Dimension of PCB without VGA height(mm): 128.0(W) x 85.0(H) x 16.0(D)mm

Operation Temperature: -10~+60°C

Relative Humidity: 5~95%RH

Storage Temperature: -20~+70°C

Please see following important safety instructions

1. The nominal voltage of DC input to the A/D board is 12V, The size of DC current depends on the TFT LCD, audio amplifier, etc. Please note that your AC/DC adapter's output plug need to match the DC input jack,the diameter of the jack is 5.5 mm.

2. Before connecting these input/output ports, Video port, it is strongly recommended that your turn off the A/D board and remove the DC 12V plug from the DC input jack.

3. Don’t put the A/D board into an airtight package. When it works, it will produce a certain heat.

4. When assembling it, please use a suitable force; don’t distort the PCB and other components