Sign In / Register

Parameters

Screen Size: 8.0 inch (diagonal)

Driver element: a-Si TFT active matrix

Display mode: Normally Black, Tranmissive

Resolution is fit for module: 1920x1080(max.)~800x600(min.)

Backlight: LED

Resolution: 1024 x 3RGB x 768

Brightness: 350cd/m2

LED Life Time: 30000hrs (Min.)

View Angle: 85/85/85/85

Color arrangement: RGB-stripe

Surface treatment: Hard Coating

Interface: LVDS

Signal type input: Video, HDMI, VGA

Active Area: 162.05(W)x121.54(H) mm

LCD Screen Size: 174.00(W)x136.00(H)x2.45(D) mm

Drive Plate Size: 128.0(W)x85.0(H)x16.0(D) mm

Dot pitch: 0.05275(W) x 0.15825(H) mm

Working Voltage: DC12V  +/- 25%(Type12V340mA±30mA)

System: PAL/NTSC switch auto matically

Working Temperature Range: -10 ~60 degree

Storage Temperature Range: -20 ~70 degree

Start time: 3.0s

Relative humidity: 5~95%RH

Please see following important safety instructions

1. The nominal voltage of DC input to the A/D board is 12V, The size of DC current depends on the TFT LCD, audio amplifier, etc. Please note that your AC/DC adapter's output plug need to match the DC input jack,the diameter of the jack is 5.5 mm.

2. Before connecting these input/output ports, Video port, it is strongly recommended that your turn off the A/D board and remove the DC 12V plug from the DC input jack.

3. Don’t put the A/D board into an airtight package. When it works, it will produce a certain heat.

4. When assembling it, please use a suitable force; don’t distort the PCB and other components