Sign In / Register

Description:

1, 1 Channel VGA signal input

3, 2 Channel HDMI signal input, and this IC support is HDMI1.2

3, 1 Road reverse signal input

4, Support wide voltage input, and can work between 8- 20V

5, Standard single interface 3.5 backlight terminal, input voltage is 9V - 10V, (this voltage is only for reference, different screen voltage will be slightly different)

6, Driver board with special circuit design, it can drive about 10V LED backlight, and the maximum support for 500mA current outout

7, Support TTL-50P standard interface, support TTL-40P standard definition interface

8, Standard 5 key keypad interface, and support dual-color LED display

9, Support TTL signal output

10, In conjunction with PCB800100, it is also possible to support 4.3"/5.0"/6.0"/7.0 inch LCD for 40pin general purpose screen

11, 40PIN-LVDS definition interface can be directly driven

12, The maximum output display resolution of the drive board is 1920*120 underfineds VGA and HDMI slave input (related to the LCD)

13, The IC and VGA part can directly input the YPBPR signal (Prpgram realization)

14, The drive board can increase the remote control function (it need to be implemented by software)

15, The drive board can be automatically detected and the relevant input voltage information is displayed (please note that this function is custom made function and it need to be contacted with the technology department of our company)

16, The drive board panel can support auto- detection of the signal on/off function (this is custom made function)

17, The drive board can be added with BNC interface (it need to be customized)

18, The positioning hole of drive board is four

19, Only HDMI sound output is supported. 

20, The drive board adopts the double-sided special FPC seat and FPC are not connected in the area, and they are directly used

21, Full-chip design, full-chip capacitor design, industrial and civl use, applicable to more occasions, wider temperature range

22, Dual-inteface design, better versatility

23, The voltage of drive board VCOM is adjusted by a potentiometer, so that more LCD can be used, and the adjustment is convenient and simple