Development KitCortex-M4 STM32F407/417ZGT6 STM32F4xxCore144 Core Board
Mouse over to zoom in
- Product 1/2
-
STM32FFxxCore144 is an easy to use MCU core board design for fast application. There is a very powerful ST microelectronics STM32F407/417ZG Micorocontroller in core board, high performance, high speed 32 bit ARM Cortex M4 core processor, 1MB ROM and 128KB RAM.A firmware library operating at 168 MHz (210DMIPS) large sample code, to help you quickly build and run your program. HY-STM32F4xxCore144 core board has a 60 pin DIP with 2.54 mm pitch male head is welded on the pin, so it can use the standard weld bread board and the hole board. All SCM port expansion connection
The main parameters of the processor
1 Cortex-M4 processor: STM32F407/417ZGT6
2 Operating frequency: 168 MHz
3 DMIPS/MHz: 1.25
4 Storage space in ROM: 1MB
5 on-chip SRAM: 192 KB
6 Working voltage: 3.3V
7 Input voltage: 4.0V-9V
8 Digital I/O Pins: 112
9 Supplies up to 800mA @ 3.3V
11 Other peripherals: Ethernet, USB OTG, USB2.0 high speed, CAMERA, FSMC, SPI, 3 * I2C, 6 * USART, 2 * CAN, 112 * fast GPIO, PWM 12bit, 3 * ADC, 2 * DAC 12bit, DMA 25 Mhz main crystal oscillator, 32768 Hz RTC crystal
Cortex-M4 processor maximum operating frequency is 168MHz
1 Mbyte Flash
192+4 Kbyte SRAM
Support for external Flash, SRAM, PSRAM, NOR and NAND Flash
8080/6800 model of LCD interface
USB 2.0 high-speed/full-speed device/host/OTG
10/100 Ethernet MAC
Hardware IEEE 1588v2
2 CAN (2.0B Active)
4 UART
3 SPI up to 30 Mbit
2 IIS
8- to 14-bit camera interface up to 48 Mbyte/s
1-bit (default), 4-bit and 8-bit SD/SDIO MMC card
12-bit 0.5 μ s A/D
12-bit D/A
17 timers up to 168MHz counting the frequency
I/O the highest frequency is 60MHz
ISP and IAP programming
Hardware configuration
20 pin 2.o patch JTAG interface
USB2.0 slave device interface (mini)
A controlled LED
A reset button
32.768Khz RTC crystal
Expanding 1M SRAM
Extend 128M NAND FLASH
Reserved NOR FLASH pads (support 2M or 16M NOR FLASH)
2.54mm pitch I/O outlet, can be installed in the universal board
Double needle 60 DIP pins, expansion of all IO port
USB or through an external 5V power supply
Core board size: 85 *46 mm
Shipping list
1 * HY-STM32F4xxCore144 core plate
1 * 2.54mm to 2.0mm JTAG adapter board
1 * 2.0mm JTAG line
1 * MiniUSB line
Customers who bought this product also purchased...
-
- $228.00
-
- $234.00
-
- $202.00
-
- $1.99
-
- $12.90
-
- $55.00
