Development KitNXP Cortex-M3 LPC1759 Board USBHOST CAN SD
Mouse over to zoom in
- Product 6/6
-
LPC1759 development board is a small circuit board, on both sides of development board is 2.54mm spacing double pinhole, the spacing is 2.54mm integer times, which can be installed in the universal board to facilitate debugging of extra features, not to use IO all leads to double pinhole on both sides and in accordance with the function partition (Motor, TFT-LCD, SPI)
LPC1759 development board provides USB-Host, USB-Device, CAN, RS485 and other communication interface to meet the communication with the external equipment needs, and provides IIC EEPROM and SD card socket is convenient to do storage applications in various ways
LPC1759 Chip
1) ARM Cortex-M3 processor, high working frequency up to 100 MHz
2) ARM Cortex-M3 built-in nested vector interrupt controller (NVIC)
3) Up to 512 KB on-chip flash program memory
4) Up to 64 kB SRAM
5) In system programming (ISP) and in application programming (IAP)
6) 8 channel universal DMA controller (GPDMA)
7) Multilayer AHB matrix interconnection for each AHB host provide separate bus
8) Segmentation APB bus between the CPU and DMA almost no stall, so as to achieve high throughput
9) USB 2.0 full speed device / Host /OTG controller, with dedicated DMA controller
10) 4 fractional baud rate generator UART
11) Dual channel CAN 2.0B controller
12) Synchronous belt, serial, full duplex communication SPI controller,
13) 2 SSP controllers with FIFO and the multi protocol function
14) 2 I2C bus interfaces, support data rates up to 400 kbit/s fast mode
15) I2S (Inter-IC audio) interface, used for digital audio input or output
16) 52 general purpose I/O (GPIO) pins with configurable pullup / pulldown resistor
17) 12 bit analog to digital converter (ADC), the conversion rate is up to 200 kHz
18)10 bit digital to analog converter (DAC)
19) 4 general purpose timers / counters
20) 1 motor control PWM, support for motor control.
21) quadrature encoder interface, monitor an external encoder
22) 1 standard PWM/ timer module with external count input
23) Real time clock (RTC)
24) Watchdog timer (WDT)
25) ARM Cortex-M3 system time timer, including an external clock input options
26) Standard JTAG test / debug interface
27) Integrated PMU (power management unit)
28) 4 low power modes
29) 3.3V single power supply (2.4 V to 3.6 V)
30) Configured as edge / level triggered external interrupt input
31) Non maskable interrupt (NMI) input
32) Wake up interrupt controller (WIC)
33) Processors through any interruption of the power down mode wake-up
34) Independent threshold to trigger the interrupt, and mandatory reduction of undervoltage detection
35) Power on reset (POR)
36) Working range from 1 MHz to 25 MHz crystal oscillator
37) Calibration 1% precision to 4 MHz internal RC oscillator
38) PLL allows CPU to run at a maximum rate of CPU
39) USB PLL can increase additional flexibility
40) Having different security level code read protection (CRP)
41) Used as unique serial number identifying the chip
Application
1 Meters
2 Lighting
3 Industrial network
4 Alarm system
5 White household electrical appliances
6 Motor control
Onboard Information
1) 10 pin spacing 2.0mm JTAG interface
2) board device consists of welding machine
3) USB2.0 slave interface
4) USB2.0 master interface
5 USB UART interface (CP2102, it can download program by Flash Magic)
6) 2 road CAN2.0 interface
7) SD memory card interface
8) TFT LCD interface
9) 1 key
10) AD adjustable resistor
11) 24C04 serial EEPROM
12) External interrupt button
Shipping list
1* LPC1759 Development Board
1* Mini USB line
Development Tools
Wiggler
OpenOCD
ULINK
ULINK2
JLINK
Customers who bought this product also purchased...
-
- $228.00
-
- $234.00
-
- $202.00
-
- $1.99
-
- $12.90
-
- $55.00
