Sign In / Register

C8051F500 processor is based on AEC-Q100 test standard design wide operating voltage, and wide operating temperature range, strong anti-interference ability and built-in CAN and LIN bus controller, is very suitable for the application of automotive electronics

Processor Parameters
1) 8051 kernel Auto level micro controller
2) The highest frequency is 50MIP
3) power supply: 1.8-5.25V 
4) operating temperature: 40 to +125 
5) AEC-Q100 testing standards
6) 64K Bytes Flash
7) 4352 Bytes RAM
8) 12-bit 200K ADC
9) 9-11 bit PWM
10) 1 CAN 2.0B
11) 1 LIN 2.1
12) 1 UART
13) 1 SPI
14) 1 SMBus

Onboard Information
1) 6-26V wide voltage supply (DC2.1 interface)
2) 10 pin C2 debug interface
3) 1 road RS232 interface
4) 1 road RS485 interface
5) 1 road CAN2.0B interface
6) 1 road LIN2.1 interface
7) A controllable LED
8) An adjustable resistor
9) External interrupt button
10) 24Cxx serial EEPROM
11) All IO leads to the distance between the 2.54 pin on

Software
1 CAN test program CAN data sending and receiving program, according to which a development board button can control another piece of the development board LED on and off.
2 The same LIN test program and CAN program, according to which a development board button can control another piece of the development board LED on and off.
3 UART test procedure provides an interrupt and query mode test program.
4 INT0 test program through the button to test the external interrupt.
5 EEPROM EEPROM test procedures, test procedures IIC interface mode.
Timer0 16bit test program, control LED blinking.
6 ADC test procedure will be voltage adjustable resistor values are printed to the serial port.
7 The watchdog testing procedures
8 Internal Flash read and write test procedures
9 PWM test program

Note: CAN and LIN testing need two development board.

Shipping list
1* C8051F500 development board 
1* Serial port extension line 
1* 9V power supply

Development tools 
U-EC6