Development Kit
Mouse over to zoom in
- Product 41/47
-
Shipping List
1* FPGA Board
1* Mini BLASTER
1* Expansion board
1* Camera Module
1* 7 inch TFT LCD Capacitive screen
Hardware Resource 1 Main chip is used for ALTERA FPGA Cyclone IV series EP4CE6E22C8N 2 Onboard large capacity EPCS16N serial configuration chip, support JTAG/AS mode 3 Onboard 64Mbit SDRAM, support SOPC, NIOS II development 4 Onboard 50MHz active crystal, provide the master clock system 5 Used for 1117-3.3V voltage regulator chip, provide 3.3V voltage output 6 Used for 1117-1.2V voltage regulator chip, provide FPGA core voltage 7 Used for 1117-2.5V voltage regulator chip, provide PLL voltage 8 Decoupling design, using a large number of decoupling capacitors 9 Provide 5V DC power outlet and USB interface power outlet 10 A system reset button (Reset), also can be used as a user input button 11 Self lock button switch 12 LED power indicator 13 IO resources, all IO leads, 3 expansion interfaces, the generic 2.54mm spacing, and their extension 14 JTAG download interface for the file is SOF, the speed is fast 15 AS download interface to download the file POF, slower, need to use the curing process 16 Size: 136*106mm Peripheral Resources 1 Onboard 4 independent buttons, can do the key control, digital logic based experiments, etc. 2 Onboard 4 LED light-emitting diode, LED control, digital logic based experiments, etc. 3 Onboard 4 digital tube, frequency meter, stopwatch 4 Onboard 4 bit dial code switch, switch control and other experiments 5 Setting 1*20 LCD screen socket, support LCD1602, LCD12864, TFT LCD (not including LCD) 6 Precision adjustable resistance, adjustable LCD backlight 7 Onboard 1 board of the buzzer, can do sound and music experiments 8 PS2 interface, do PS/2 keyboard experiment 9 Onboard the new imported temperature sensor chip LM75A, do a thermometer experiment 10 RS232 serial port, serial communication experiment 11 VGA interface, monitor experiment 12 I2C serial AT24CO8 EEPROM, do IIC bus experiment 13 Infrared receiving module Parameters Photosensitive array: 640X480 IO voltage: 2.5V to 3.0V (Internal LDO 1.8V) Power consumption 60mW/15fps VGA YUV Dormancy <20 A Temperature operation: -30 to 70 degree Stable working: 0 to 50 degree Output format (8 bit): YUV/YCbCr4:2:2 RGB565/555/444 GRB4:2:2 Raw RGB Data Optical dimension: 1/6" Viewing angle: 25 degrees The maximum rate: 30fps VGA Sensitivity: 1.3V/ (Lux-sec) Signal to noise ratio: 46 dB Dynamic range: 52 dB Browse mode line Electronic exposure 1 lines to 510 lines Pixel area: 3.6μm x 3.6μm Dark current: 12 mV/s at 60 Well Capacity 17Ke Internal with LDO, so the module power supply can be directly connected to 3.3V 
-
- $228.00
-
- $234.00
-
- $202.00
-
- $1.99
-
- $12.90
-
- $55.00
