Sign In / Register

Shipping List

1* CPLD Development Board

1* USB Blaster

1* 5V2A Power

Characteristic

Main chip: EPM570T100C5N

IO: all IO are leads, and welded with pin heaser

Support core plate mode by jump cap

Power supply mode: dual power supply, support 5V and USB power supply

Onboard high-speed serial AD circuit

Onboard high-speed serial DA circuit

Infrared function

Step drive

High precision clock

Supports LCD1602 and LCD12864

Temperature sensor interface

Onboard 4bit shift switch

Onboard 8bit digital tube

Onboard 6 independent buttons

Onboard 8 LED lamps

Size: 150*108mm

Core Board Resources

Onboard 50MHz crystal active, provide the system clock

Provide standby clock pad (need to provide the required clock on the back of the PCB board by yourself)

Used for 1117-3.3V voltage regulator chip, CPLD operating voltage

Decoupling design, the use of a large number of decoupling capacitors

Provide 5V DC power outlet

Provide USB power supply

Red power indicator

Self lock button switch

A system reset button Reset, as the user input button

All IO leads through the 2*20 pin, 2.54mm space

All IO PIN numbers are clearly marked, and the use of the process is not always look at the schematic diagram of the I/O pin corresponding, very convenient

Peripheral Interface Board Resource

Onboard 6 independent buttons, do key controlled, and the digital logic based experiment.

Onboard 8bit LED light-emitting diode, digital logic can be used as the basis of running water, display experiments, etc.

Onboard 8bit digital tube, dynamic or static digital tube display experiment, frequency meter, stopwatch etc.

Onboard 4 bit dial switch, switch control and other experiments

Onboard 1 road buzzer, can do sound and music experiments

LCD1602 LCD screen, do character display experiments (not including LCD)

LCD12864 LCD screen interface, do Chinese font and character display experiment (not including LCD)

RS232 serial port communication experiment

PS2 interface, do PS/2 keyboard experiment

Temperature sensor interface (not including temperature sensor element), do a thermometer experiment

AD TLC549 converter, such as voltage meter

DA TLC5615 converter, DA output control experiment

ULN2003 stepping motor control module

Infrared receiving module

VGA interface, do monitor experiment

32.768KHz reference oscillator

TL431, as the 2.5V voltage reference source

Adjustable potentiometer, adjust DA value

I2C serial EEPROMAT24C08, do IIC bus experiment

PCF8563T real time clock