Development Kit
Mouse over to zoom in
- Product 23/47
-
Shipping List
1* FPGA Board
1* Hight Speed BLASTER
1* Expansion board
1* Camera Module
1* VGA Module
Hardware Resource
1 Main chip is used for ALTERA FPGA Cyclone IV series EP4CE6E22C8N
2 Onboard large capacity EPCS16N serial configuration chip, support JTAG/AS mode
3 Onboard 64Mbit SDRAM, support SOPC, NIOS II development
4 Onboard 50MHz active crystal, provide the master clock system
5 Used for 1117-3.3V voltage regulator chip, provide 3.3V voltage output
6 Used for 1117-1.2V voltage regulator chip, provide FPGA core voltage
7 Used for 1117-2.5V voltage regulator chip, provide PLL voltage
8 Decoupling design, using a large number of decoupling capacitors
9 Provide 5V DC power outlet and USB interface power outlet
10 A system reset button (Reset), also can be used as a user input button
11 Self lock button switch
12 LED power indicator
13 IO resources, all IO leads, 3 expansion interfaces, the generic 2.54mm spacing, and their extension
14 JTAG download interface for the file is SOF, the speed is fast
15 AS download interface to download the file POF, slower, need to use the curing process
16 Size: 136*106mm
Peripheral Resources
1 Onboard 4 independent buttons, can do the key control, digital logic based experiments, etc.
2 Onboard 4 LED light-emitting diode, LED control, digital logic based experiments, etc.
3 Onboard 4 digital tube, frequency meter, stopwatch
4 Onboard 4 bit dial code switch, switch control and other experiments
5 Setting 1*20 LCD screen socket, support LCD1602, LCD12864, TFT LCD (not including LCD)
6 Precision adjustable resistance, adjustable LCD backlight
7 Onboard 1 board of the buzzer, can do sound and music experiments
8 PS2 interface, do PS/2 keyboard experiment
9 Onboard the new imported temperature sensor chip LM75A, do a thermometer experiment
10 RS232 serial port, serial communication experiment
11 VGA interface, monitor experiment
12 I2C serial AT24CO8 EEPROM, do IIC bus experiment
13 Infrared receiving module
VGA Module
Positive: VGA Module Resistance network 65536 Color
Back: SD Card Socket
Connected to the VGA display, with the camera, the image can be collected, and displayed on the display
Complete the SD card experiment
Parameters
Photosensitive array: 640X480
IO voltage: 2.5V to 3.0V (Internal LDO 1.8V)
Power consumption 60mW/15fps VGA YUV
Dormancy <20 A
Temperature operation: -30 to 70 degree
Stable working: 0 to 50 degree
Output format (8 bit): YUV/YCbCr4:2:2 RGB565/555/444 GRB4:2:2 Raw RGB Data
Optical dimension: 1/6"
Viewing angle: 25 degrees
The maximum rate: 30fps VGA
Sensitivity: 1.3V/ (Lux-sec)
Signal to noise ratio: 46 dB
Dynamic range: 52 dB
Browse mode line
Electronic exposure 1 lines to 510 lines
Pixel area: 3.6μm x 3.6μm
Dark current: 12 mV/s at 60
Well Capacity 17Ke
Internal with LDO, so the module power supply can be directly connected to 3.3V
-
- $228.00
-
- $234.00
-
- $202.00
-
- $1.99
-
- $12.90
-
- $55.00
